Try These Simple Woodworking Projects for Beginners

Are you a woodworking enthusiast but don't know where to start? You have many options in front of you. Among these, some projects don't have to be made in a fully-equipped workshop by a team of experts. Instead, some common tools and effort will be enough. Such projects are great for beginners and can fuel the passion of anyone looking to explore this craft.

Simple Benches for Beginners

Some projects require more time than others, although they may seem simple at first glance. Being patient and prepared helps immensely. There are many places where a wooden bench can go, whether in the backyard, the garden, or on a front porch.

Facebook // Best Pallet Ideas

A simple bench with a classic design can be made up only after a few hours of woodworking. It is something any novice should be able to make at a minimal cost. All it takes to make a bench is two boards, 18 screws, and the desire to put it together.

Chopping Boards and Serving Trays

There's an easy way to make an attractive board for slicing and dicing that doubles as a serving tray. All it takes is dry-fitting the parts, making the arc, and gluing everything together. Maybe this is easier said than done, but practice makes perfect!

Facebook // PendhariFurniture

Any yardstick or thin board can be used to scribe the arcs. Water-resistant wood glue is a must, and the board must be kept out of the dishwasher to stay intact. Make sure to use even boards to reduce sanding later.

Storage Booster Stools

Making a practical shoe storage booster stool is easy and takes about an hour of woodworking. It can then be stowed away in a closet for convenience. Moreover, a stool doubles up as a step for accessing high shelves. Crafting one requires a 4x4-foot sheet of 3/4 inch plywood, wood glue, and a few 8-d finish nails that are three inches long.

Pinterest // @familyhandyman.com

First, cut the plywood into pieces, and then the wood glue should be used on the joints to secure it together with the 8-d nails. The sides should be nailed through to the back, followed by nailing through the top into the sides and back. Finally, designate the shelf positions and affix them by nailing through the sides.